Penn Group Deals

Ashly nXe3.04 Network Audio Power Amplifier with Ethernet – 4-Channel x 3000 Watts

$ 6,074.92

Ashly nXe3.04 Network Audio Power Amplifier with Ethernet – 4-Channel x 3000 Watts

This product drop ships directly from the manufacturer.

UPC: nan SKU: ASH-NXE304 Category: Brand:


Introducing the Ashly series of nX, nXe, or nXp power amplifiers. These products use state of the art, light weight, high power, high efficiency switching technology developed through years of design and field testing. nX amplifiers are available in three series, designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers as well as schools, store fronts,and worship spaces.

Available as three separate amplifier series, NX offers 2 or 4-channel models as NX (base model series), NXE (networkable), or NXP (networkable + DSP).

Ethernet Control using Protea™NE software.

Also, serial data control by Ashly programmable remotes or third party controllers, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, optional Dante™, CobraNet™, or AES3 digital audio capability (factory-installed).

Real-Time Clock with Event Scheduler.

Assign automatic execution of selected functions and tasks. The event scheduler is programmed using PneS software and stored in the amplifier.

Ashly Remote Control via iPad® app.

Use our Ashly Remote free app available for custom design of secure wireless control over a network.

Class-D Switching Amplifier Technology.

NXE features a switch-mode power supply which automatically detects 120VAC or 240VAC operation and makes NXE one of the lightest in its class.

Multi-Mode Operation.

Selectable Outputs on each channel allow you to choose the desired output mode. Set the DIP-switch configuration for Low Impedance (2, 4, and 8 Ohm), or Constant Voltage (70V or 100V) and you’re set to go.

Energy Efficiency.

NXE has power-saving Ashly EMS™ (Energy Management System) which provides an automatic sleep-mode drawing less than 1 Watt (defeatable).

Multiple Internal Power Supplies.

NXE provides increased channel separation and reliability.

Please Note:

All Ashly nX, nXe & nXp amps include the appropriate power cable that corresponds with the amps power connector.


  • Selectable 80Hz Hipass filter, limiter, and input gain per channel, via rear panel
  • Remote DC level control per channel
  • Extensive protection circuitry, continuously variable cooling fans
  • Ethernet port for software control and monitoring of amplifier functions, with front panel COM activity LED
  • Serial data port available for Ashly WR-5 and RD-8C programmable remote control (optional RS-232 converter INA-1 available for third party controllers)
  • Instant Standby Mode, 30% reduction in idle power consumption, triggered by contact closure, software control, or event scheduler
  • Preset recall via contact closure, software control, remote control, or event scheduler
  • Programmable power-on delay
  • Aux preamp line outputs for driving other amplifiers
  • Fault condition logic outputs, per channel
  • Neutrik® Combo XLR – 1/4” TRS jack plus Euroblock input connectors
  • Neutrik® speakON® twist locking loudspeaker connectors
  • Neutrik® powerCON® detachable AC mains connector
  • Safety/Compliance: cTUVus, CE, FCC, RoHS


  • Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V
  • Damping Factor: >250 (8 Ohms load <1kHz)
  • Input High Pass Filter: 80Hz 2nd order
  • Distortion (SMPTE, typical): <0.5%
  • Distortion (THD-N, typical): <0.5% (8 Ohms, 10dB below rated power, 20Hz–20kHz)
  • Channel Separation: -75dB (dB from full output, 1kHz)
  • Signal-to-Noise (20Hz–20kHz, unweighted): >114dB (all 3.0x models), >111dB (all 1.5x models), >108dB (all 800x models), >105dB (all 400x models)
  • Frequency Response: 20Hz–20kHz, +/-0.05dB
  • Balanced Input Connector: Euroblock 3.5mm, ¼” TRS and XLR Combo jack
  • Input Impedance: 10k Ohms
  • Maximum Input Level: +21dBu
  • Speaker Output Connector: Neutrik® speakON®
  • Control Network: Compatible w/ standard 100MB Ethernet
  • AUX Output Connector: Balanced Euroblock 3.5mm
  • AUX Output Maximum Level: +21dBu
  • Remote Standby Contact Closure: Euroblock 3.5mm, close contact to GND for standby mode
  • Preset Recall Contact Closure: Euroblock 3.5mm, close contact to GND for preset 1-4 recall
  • Data Connection: Euroblock 3.5mm – Gnd, +18V, In, Out
  • Fault Condition Logic Outputs: Fault indicated by loss of 1Hz “heartbeat” pulse signal
  • Remote DC Level Control: Euroblock 3.5mm – Gnd, CV, V+ per input
  • Attenuators (per channel): Front panel, software, offset link group, and remote. Fully off = Mute
  • Amplifier Protection: Inrush current limitation, temperature monitoring, output over-power protection, mains fuses
  • Cooling: Continuously variable temperature controlled axial fan(s)
  • Environmental: 32–113 deg F, (0–45 deg, C) (noncondensing)
  • Unit Dimensions (all models): 19”W x 3.5”H x 16.84”D (483mm x 89mm x 428mm)
  • Unit Weight: 1.54/3.04: 28.7lbs (13kg) 1.52/3.02: 22.7lbs (10.3kg)
  • Power Requirements (@ 50/60Hz): Nominal (Automatic Sensing SMPS): 120VAC/240VAC, Operating Range: 70–135VAC 140–270VAC
  • Power Cable Connector Requirements: 32A powerCON (Cable Included)


  • 5 Years

Additional information

Weight 35.2 lbs


There are no reviews yet.

Be the first to review “Ashly nXe3.04 Network Audio Power Amplifier with Ethernet – 4-Channel x 3000 Watts”

Your email address will not be published.